SNA
500 & 600 Series
Bearing Housing
for Bearings with
ADAPTER SLEEVE
Shaft
dia :- 25 to
140 mm
Material
Cast
Iron FG 200
- IS 210, 1993 (ISO/R
185-1961,Grade
20)
Mfg.
Standard
IS
14347 - 1996
ISO 113 - 1994
Seal
TC
(Felt in aluminum
half rings)
Lubrication
Grease
or Oil
Type
Horizontal
Split Type
with two mounting
holes of oval
shape.
Application
Relatively
higher load
application
like in paper
m/c, mining,
construction
and conveyor.
Better sealing
arrangement
permits dusty
and temperature
surroundings.
Optional
Features available
on request
a)
Four Foundation
Bolt Holes
at base
b) V Seal (TA),Double
Lip Seal (TG),
Labyrinth Seal(TS)
c) End Cover
for closed
end type
d) Material-C.S.
Gr.280/520,
IS 1030 & S.G.
Iron
e) Solid Base
for heavy load
application
f) Drain plug
For
bearing housings where strength of grey Cast
Iron material is still inadequate,
these housings an also be supplied in
cast steel or Spheroidal Graphite Iron(ductile).
Such bearing
housings can
support approximately
twice the load
permitted for
grey cast iron
housings.
These bearing housings are dimensionally inter changeable and suitable to bearings
of international make like SKF, FAG, NTN,ZKL,TIMKEN, etc.
COSMO SN, SNA & SNH type housings are designed interchangeable for same bearing
size and mounting dimensions.
All housings are supplied as non located type. For locating type, suitable Locating
Ring-FRB to be ordered separately
