SN
500 & 600 Plummer
Block Housing for
bearings with ADAPTER
SLEEVE
Shaft
dia :- 20 to
140 mm
Material
Cast
Iron
FG 150 - IS
210, 1993
(ISO/R
185-1961,Grade
15)
Mfg.
Standard
IS
14347 - 1996
ISO 113 - 1994
Seal
Felt
Lubrication
Grease
Type
Horizontal
Split Type
with two mounting
holes of oval
shape.
Application
Economic
replaceable
units, normally
require little
maintenance.
Used in general
industrial
application
having moderate
load & speed
in relatively
less hostile
surrounding.
Optional
Features Available
On
Request
a)
Four Foundation
Bolt Hole at
base
b) Four Cap
Bolts
b) Labyrinth
seal
c) End Cover
for closed
end
d) Material-C.S.
Gr.280/520,
IS 1030 for
sever load.
e) Solid Base
for heavy load
application
For
bearing housings
where strength
of grey Cast
Iron material
is still inadequate,
these housings
can also be
supplied in
cast steel
or Spheroidal
Graphite Iron
(ductile).
Such bearing
housings can
support approximately
twice the load
permitted for
grey cast iron
housings.
These
bearing housings
are dimensionally
inter changeable
and suitable
to bearings
of international
make like SKF,
FAG, NTN,ZKL,TIMKEN,
etc.
COSMO SN, SNA & SNH
type housings
are designed
interchangeable
for same bearing
size and mounting
dimensions.
All housings
are supplied
as non located
type. For locating
type, suitable
Locating Ring-FRB
to be ordered
separately.
