H
  HE
  OH
  AH
  AOH
  KM,KML,HM,HML
  HM + MS
  MB & MBL
LOE TYPE PLUMMER BLOCK HOUSINGS:
Extra Heavy Duty Series
Sizes Shaft dia 50 to 240 mm.
Suitable to bearings: 22300ES, 22200ES; 22300ESK, 22200ESk.
Material Cast Iron FG- 260, IS 210, 1993
(ISO /R -185 -1961 GR.25)
Seal Labyrinth seal with external oil traps.
Lubrication Oil by Splash Ring & Oil Sump.
Type Horizontal Split Type with end covers on both sides and four foundation holes of rectangal shape. Accessories supplied with one set of housing are : Oil level indicator-1, Sealing Collar-2, Oil Ring-1, Drain Plug-7, Air Breather-1, one M24 tapped hole for connection of Mercury in oil thermometer, one M18 tapped hole for connection of Resistance thermometer, Eye Bolt-1, and Gasket-2.
Application LOE is most versatile and suitable for continuous and heavy load, high speed bearing application with high temperature service. LOE type is preferred for large Industrial FAN application where it gives reliable service without any interruption or stoppage. It is also used in cement, mining and similar industries. For troublefree operation of this housing, there is provision to attach thermometer and vibration probe for measurement of temperature and vibration. LOE Design is to much extent similar to SOFN type and both can be used for identical application. However they are not interchangeable as the mounting distensions are different. In general, LOE type is somewhat heavier construction than SOFN but have equivalent load carrying capacity.
Option Features available on request a.) BL, BF, AL, or AF as per located or free bearing      and closed or open end.
b.) Oil Inlet Assembly (for forced feed lubrication)
c.) Material : Cast steel : LOE (ST)  -----
                   S.G  Iron   : LOE (DT) ------
1. Water Jacketed LOE---WJ housings are available for high     temperature application.
2. Water cooling coils are also provided for medium range of     temperature, designated LOE---WC.

• LOE Housing are also available for bearing with cylindrical bore.
• For bearing housings where strength of grey Cast Iron material is   still inadequate, these housings can also be supplied in cast steel or   Spheroidal Graphite Iron (ductile). Such bearing housings can   support approximately twice the load permitted for grey cast iron   housings.
• These bearing housings are dimensionally inter changeable and   suitable to bearings of international make like SKF, FAG, NTN, ZKL,   TIMKEN, etc.
• For LOE type it is necessary to specify requirement for located   Bearing type or non-located Bearing type because loose Locating   Rings (FRB) are not used. Instead, the bearing width inside the   housing is machined to suit located or non-located type. Put suffix as   under to indicate this requirement :

BL Housing for thru’ shaft & Non locating bearing AL Housing for shaft end (with end cover) & Non-locating bearing
BF Housing for thru’ shaft & locating bearing AF Housing for shaft end (with end cover) & Locating bearing
   
© Truefit Engineering Co. Ltd. 2009       Designed by : Dotcom Services (India) Pvt. Ltd.         Best view: 1024 x 768 px